Saturday, September 1, 2012

Netgear GS108T and Synology DS412+ Set Up Link Aggregation

The Process
First step is to power down the DS412+ and anything else in your network that needs re-cabling. Make sure to leave at least 2 ports free for the DS412+. Find the two Gig-E ports on the back of the DS412+ and hook it up to any two ports on the Smart Switch. In my case I made the Netgear GS108T the main switch and hooked it up to my Wireless router that connects to the Internet. A second Netgear switch is hooked up by a long cable to another room where the desktop and Xbox reside. Across the living room to the TV I have my old Linux NAS hooked up. Power everything up and make sure everything is communicating as is.


Configure Link Aggregation on GS108T
The GS108T comes with Windows software called SmartControlManager. Alternatively you can access it via a Web Browser if you know its IP address. How do you find it's address aside from using Smart Control Manager? My LAN uses the Wireless router as a DHCP server. So I logged on to that device and listed all DHCP client. Using the names I found the GS108Tv2. A quick browser launch and an http:// got me to the admin page.

From here I choose the Switching tab which immediately shows me the active ports. Follow LAG -> Basic -> LAG Configuration. Select the LAG1 entry (since this is an 8-port switch, you can have a maximum of 4 LAG). This is where it confused me at first. Selecting LAG1 populates the entry fields above it. Enter a Description, I chose "diskstation" then LAG Type of "LACP". Hit Apply.


Move to the LAG Membership option. From here select LAG1 then choose the ports the DS412+ was hooked up to. There is a yellow button that is equivalent of Select All. This works only if you have one device running LAG on this switch. Hit Apply.

That's it for the GS108T. Now to enable it on the NAS.


Configure Link Aggregation on Synology DS412+

Login to DSM on the DS412+ then launch Control Panel -> Network -> Network Interface -> Create
x IEEE 802.3ad Dynamic Link Aggregation -> Next
The two LAN ports should be automatically selected -> Next
x Get network configuration automatically (DHCP) -> Apply
You will now find one connection called Bond 1 rather than two LAN connections. Congratulations, you now have Channel Bonding turned on! The two LAN ports will now start working as a team for all incoming and outgoing requests.
Give it a stress test if you like.

9 comments:

Unknown said...

Mike thank you very much, your explanation has been of great help. ;-)

Deniz Erel said...

Thanks for the guide

erwinrivera said...
This comment has been removed by the author.
Franz-Michael S. Mellbin said...

Just what I was looking for. Netgear needs to be better at explaining this. Should be easy but I was stumped until I found this.

Steve Endow said...

Thanks for the nice write up and especially the screen shots.

I found that the Static LAG Type setting prevented the LAG from working, making the Synology inaccessible.

The LACP setting did the trick. Works great now.

Dave said...

Even with DS 1515+ very helpful. Thanks.

Unknown said...

Thank you thank you thank you.

Travis Smith said...


What's up every one, here every person is sharing such know-how, so it's good to read this webpage, and I used to go to see this weblog daily. citicards.com login

Stan Kirchner said...

Pleased to read this stuff, thjanks!




backup vmware host